Heavy Cut Compound 400

Achieves high gloss in one process step.

Our innovative Menzerna Heavy Cut Compound 400 for automotive clear coats leaves a dazzling impression everywhere. Gets sanding marks out of the way in record time. Works into the finish range thanks to the latest polishing technology with dividing polishing grit.

Benefits:

• Polishes and produces gloss in one step
• Saves time thanks to one-step polishing process
• High efficiency
• High gloss Level
• Silicone-free 

Product Description

enzerna Heavy Cut Compound 400 (HCC 400) is the innovative sanding polish for automotive clear coats. HCC 400 removes sanding marks and signs of use in the shortest possible time and guarantees a perfect surface.

Recommended Usage
1. Clean surface thoroughly prior to polishing. 2. Shake the bottle prior to use and apply a small quantity of the product onto the polishing pad (a pea-sized drop is sufficient for an area measuring approx. 40 x 40 cm). 3. Use the Menzerna Heavy Cut Foam Pad or Menzerna Lambs wool in the event of heavy signs of use. If using a new or dry pad, apply sufficient polish to prevent the formation of noticeable holograms.
4. Use either a rotary or an orbital polishing machine and use the cross-coating method. Apply light pressure at the start of the polishing process. Take away the pressure in the final cycles and increase the speed of the polishing machine by 10%.
5. If working on very dry coatings, spray a little water onto the surface to prevent dust formation. 6. At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible.
7. Once you have finished polishing, remove any residue with our Premium Microfiber cloth, without applying any pressure. 8. Whatever the demands of the surface: Use Menzerna HCC400 with the Soft Cut Foam Pad or a Menzerna Finish in order to achieve a high-gloss finish.

video EN