Dinitrol 3624 Cavity Protection 180 L

Characteristics:  
•     Transparent     Beige     
•     Solvent     free     
•     85°C Heat Kick
•     No hazard labelling
•     Cavity     
•     Universal     
•     Drip free process

Applications:
DINITROL 3624 is a solvent free corrosion preventive agent with low odour that gives a very good long-term corrosion protection. The material converts to a film after heat treatment and is 'through dried' with air after 24 hrs at 23°C.  
DINITROL 3624 is mainly used as cavity treatment in the automotive industry.  
DINITROL 3624 should be used in combination with heat treatment. In general the gelling process requires a material temperature of 80°C for a minimum of 2 minutes.  

Method of use:
DINITROL 3624 is applied by airmix or airless spraying.

Technical properties:  
Colour: Transparent Beige                                                                 
Type of film: Waxy
Recommended film thickness:  50μm  
Removability: Alkali cleaning compound
Density at 23°C: 970 kg/m³
Viscosity at 23°C: 210 mPas
Dry matter content: > 98% by weight
Flash Point: > 130°C  
Drying Time: 24 hrs
Low temperature adhesion: - 40°C
Effect on car paint: None
Heat resistance when dried: > 100°C
Salt spray test: 240 hrs
Corrosion cycle test: 3 cycles
Available: 180 L Drum