Cromax Pro WB2020 Pro Basecoat Binder II 3,5 L

Axalta (DuPont) Cromax Pro Basecoat Binder II WB2020 is formulated for use with Cromax Pro Basecoat.

Cromax Pro is a basecoat designed to deliver single-visit application with 1.5-coat coverage for the majority of colors with no flash time required between coats to help reduce steps in the repair process. Solid, metallic and pearl colors are clean and bright to help a technician easily and accurately match OEM finishes.

• Excellent coverage with exceptionally accurate colour matching.
• Quick and economical to use, helping to increase throughput and productivity.
• Is part of a dedicated and comprehensive tints and binders system.
• Large application window.
• Flexible - can be used under different climate conditions and with different application techniques.
• Conforms to EU directive 2004/42/EC

Why Choose Cromax Pro?

• All the colors you could want — solids, metallic and pearl — to help with excellent color match to keep customers happy.
• One and done. Single-visit, 1.5 coat application for most colors should mean better coverage in less time.
• Fewer coats means less worrying about dirt and contamination.
• Apply wet on wet without waiting. No flash time required between coats means faster cycle times.
• Helps to reduce time and energy cost thanks to fewer bake or drying cycles.

• Old or original paintwork well sanded and cleaned.
• Primer-surfacer or Surfacer, sanded and cleaned Primer-Surfacer or Surfacer, unsanded in a wet-on-wet process
• Surfaces must be prepared and cleaned correctly before application
• Repair areas should be sanded with P500-P600 (by machine) or P800-P1000 (by hand) and cleaned
• For optimum application properties, apply the basecoat immediately after addition of Cromax Pro Basecoat Controller WB2040/WB2043/WB2045. Use within same working day. Colours should be stored without the addition of the Controller.
• 1 + 0.5 flash-off until matt
• Apply a closed coat by wetting the surface sufficiently to achieve 70-80% opacity in the wet film. This is followed by an effect coat with increased distance to the object with close overlaps into the still wet first layer. This final ½ (>50%) effect coat achieves the correct effect orientation, completes the hiding and provides the correct colour position.
• Clearcoat