Motip Camouflage Colour RAL 6014 Spray 400 ml

Motip Camouflage Colour RAL 6014 Spray 400 ml

Camouflage lacquer to treat surfaces, treated and untreated, of wood, metal, aluminium, glass, stone, textile and various types of plastic. Camouflage lacquer has excellent coverage and filling property, lasting colour and lasting gloss. Camouflage lacquer is scratch free and shock proof and is resistant to petrol, chemicals and weather influences. MoTip Camouflage Lacquer is corrosion preventive and has excellent adhesion.

Product description
High quality camouflage lacquer to treat surfaces, treated and untreated, of wood, metal, aluminium, glass, stone, textile and various types of plastic.

Product characteristics
Excellent coverage and filling property
Lasting colour and gloss
Scratch free and shock proof
Resistant to petrol, chemicals and weather influences
Corrosion preventive
Excellent adhesion

Physical and Chemical Characteristics
Contents : 400 ml
Base : Alkyd resin
VOC-content : Approximately 83% w/w
Solid content : Approximately 17% w/w
Gloss : Mat <5 at an angle of 60°
Coverage : 1,25 to 1,75 m²
Dust dry : After 10 to 20 minutes
Tack free : After approximately 45 minutes
Hardened/re-sprayable : After 16 hours
Heat resistant : To 110°C

Usage
Before use, carefully read the directions on the packaging and act accordingly.

Pre Treatment
The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface.

Treatment
The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.

Apply the lacquer in several thin layers. Before applying the next layer, again shake the aerosol. Even when the lacquer has hardened, do not treat with acrylic lacquer or nitro-cellulose lacquer.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

Signal word: Danger
Hazardous components for labeling: Acetone; Hydrocarbons, C9-C10, n-alkanes, isoalkanes, cyclics, <2% aromatics; Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cycloalkanes, <2% aromatics
H222-H229 Extremely flammable aerosol. Pressurized container: may burst if heated. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness.
P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P260 Do not breathe aerosol. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C. P501 Dispose of contents/container in accordance with local regulations.
EUH066 Repeated exposure may cause skin dryness or cracking. EUH208 Contains neodecanoic acid, cobalt salt. May produce an allergic reaction. EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Formation of explosive mixtures possible without sufficient ventilation.