Motip Silicone Remover Spray 400 ml

Product Description
Motip Silicone Remover Spray 400 ml is an effective cleaner designed to remove silicone, grease, oil, wax, tar, dirt, and adhesive residues from various surfaces. It is used to prepare surfaces before painting, ensuring better adhesion of subsequent layers. Suitable for use on metal, plastic, and other materials

Features

• Thoroughly removes silicone, grease, oil, wax, tar, and adhesive residues

• Mild, non-aggressive solvent

• Improves adhesion of subsequent coatings

• Simple, time-saving application

Instructions for Use

1. Before use, carefully read the directions on the packaging and act accordingly.

2. The aerosol should have room temperature. Best processing temperature is 10–25 °C.

3. Shake the aerosol before use.

4. Spray to test.

5. Hold the spray at a distance of 25–30 cm from the surface.

6. Evenly spray the surface and wipe with a clean, dry cloth.

7. Repeat the treatment until the contamination has disappeared.

8. Allow the cleaned surfaces to evaporate well.

Signal word: Danger
Contains: Hydrocarbons, C7-C9, n-alkanes, isoalkanes, cyclics; propan-2-ol
H222-H229 Extremely flammable aerosol. Pressurised container: may burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe aerosol.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.
P501 Dispose of contents/container in accordance with local regulations.
EUH066 Repeated exposure may cause skin dryness or cracking.
Without adequate ventilation, explosive mixtures may form.