Dinitrol ML Cavity Protection 5 L

Characteristics:
• Brown
• Extremely Penetrating
• Stops ongoing corrosion
• Water displacing
• Oily, flexible film
• Wet in wet with bitumen UBC

Applications:
DINITROL ML is designed for application into closed cavities such as doors, frame members and exterior joints and crevices. The product can be used for rust-proofing of second-hand cars, trucks, buses and other vehicles.

Method of use: DINITROL ML is applied by spraying with manual or semi-automatic. DINITROL application equipment, and is suitable for either air-mixed or airless spraying.

Technical properties:
Colour: brown
Type of film: oily, greasy
Density at 23°C: 860 kg/m³
Viscosity at 23°C, DIN 2: 60 s
Dry matter content: 46 % by weight
Flash point: 40°C
Aromatic content in solvent: < 1 %
Recommended film thickness wet: 30 μm
Recommended layer thickness: 10 μm
Drying time: 1 h
Low temperature adhesion: < - 40°C
Effect on car paint: none
Removability: White
Spirit Salt spray test: > 96 h
Penetration 50 μm gap: > 70 mm
Available in: 500 ML Spray can / 5 L Pail / 60 L Drum / Container