Dupli-Color Insulating primer for plaster wood and concrete spray 400ml
  • Dupli-Color Insulating primer for plaster wood and concrete spray 400ml
  • Dupli-Color Insulating primer for plaster wood and concrete spray 400ml
  • Dupli-Color Insulating primer for plaster wood and concrete spray 400ml

Dupli-Color Insulating primer for plaster wood and concrete spray 400ml

11,98 /pcs
9,90excluding VAT
In stock (2 pcs)
  • Detailed description
  • Parameters
  • Brand
  • Rating
  • Discussion

Fast drying insulating primer spray for interior and exterior application on the basis of synthetic resins, with excellent isolation and barrier effect against many different types of stains (especially water stains) on mineral-based substrates (plaster etc.), wood and concrete. Can be painted over with all emulsion paints, alkyd-based, water-based and acrylic paints; not with two-component paints. Adjustable spray cone width (horizontally and vertically).

Application area: Ideal when fastness and mobility are the primary considerations.
 

QUALITY AND PROPERTIES

  • Quick and easy to apply
  • Excellent insulation and protection against many types of stains such as water stains on mineral surfaces (plaster, etc.), timber and concrete
  • Can be recoated with all paints, alkyd- and water-based acrylic coatings
  • Based on synthetic resins

PHYSICAL AND CHEMICAL DATA

  • Basis of binder: Synthetic resins
  • Colour: white
  • Smell: solvent
  • Efficiency:
    Depending on consistence and colour of the ground:
    400 ml are sufficient for approx. 1,0 - 1,5 m²
  • Substrate:
    Wood, metal and on minerally substrates like concrete, stone, plastering etc.
  • Drying time (at 20°C, 50% relative air humidity):
    Dust-dry: 6 min
    Touch-dry: 60 min
    Re-coatable: 60 min
    The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
  • Temperature resistance: to 110°C
  • Storage stability:
    10 years if appropriabte storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    Aerosol cans, maximum nominal volume 400 ml
  • VOC-value: 254,9 g

USING INSTRUCTIONS

Before use, carefully read and observe the warning texts on the label!

  • Clean surfaces to be painted thoroughly with DUPLI-COLOR Degreaser art.no. 478376, then sand
  • The area must be dry and free of dust and grease
  • Shake can well for 3 minutes
  • Carry out spray test
  • 2-3 coats
 
  • Wear an appropriate respirator (type A2/P3)
 

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Product code 478413
EAN 4048500478413
Brand Motip

0 reviews and 0 user reviews

  • 5 0x
  • 4 0x
  • 3 0x
  • 2 0x
  • 1 0x
Nobody has yet rated.
Be the first to write a review for this product.
Do you have a question about the product? Ask a question to our pros.

Nobody has asked anything yet.
Spinner
Cookies Cookies

We need your consent to the use of individual data so that you can show information about your interests, among other things. Click "OK" to give your consent.

You can refuse consent here.

Here you can customize your cookie settings according to your preferences.