Dupli Color STRUCTURE Black Spray 400ml
  • Dupli Color STRUCTURE Black Spray 400ml
  • Dupli Color STRUCTURE Black Spray 400ml
  • Dupli Color STRUCTURE Black Spray 400ml
  • Dupli Color STRUCTURE Black Spray 400ml

Dupli Color STRUCTURE Black Spray 400ml

8,47 /pcs
7,00excluding VAT
In stock (18 pcs)
  • Detailed description
  • Parameters
  • Brand
  • Rating
  • Discussion

With this high-performance lacquer you'll achieve a special, rough texture in miscellaneous colour shades. DUPLI-COLOR STRUCTURE SPRAY is suitable for customising all kinds of car parts and for the repair and restructuring of repaired resp. filled plastic parts.

If desired, it is possible to coat afterwards with any DUPLI-COLOR Acrylic Spray, for example DUPLI-COLOR Auto-Color or RAL-ACRYL.

For home decoration and handicrafts on metal, wood, glass, stone, ceramics, cardboards and many coatable hard plastics.
 

QUALITY AND PROPERTIES

  • High-grade nitro-combi quality
  • Special, rough texture
  • Satin gloss
  • Very good coverage
  • Excellent adhesion
  • Quick-drying
  • Suitable for painting and repair of indoors and outdoors objects
  • Excellent colour retention: weather-resistant, light-proof, UV-resistant
  • Excellently re-coatable

PHYSICAL AND CHEMICAL DATA

  • Basis of the binder: Nitro-combi
  • Colour: diverse
  • Smell: solvent
  • Degree of gloss (at measurement angle 60° acc. to DIN 67530):
    satin matt, not measurable due to rough texture
  • Efficiency:
    Depending on consistence and color of the ground:
    400 ml are sufficient for approx. 1.5 m²
  • Drying time (at 20°C, 50% relative air humidity):
    Dust-dry: after approx. 10 minutes
    Non-sticky: after approx. 15 minutes
    Dry to touch: after approx. 50 minutes
    Coatable with Structure Spray: at any time
    Coatable with other top coats: after 3 hours
    The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
  • Temperature-resistant: up to 80°C
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size: aerosol cans with maximum nominal volume 400 ml

USING INSTRUCTIONS

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Application

Preparation of the ground:

  • Clean underground from dirt and fat.
  • Derust metals.
  • On plastic parts always use DUPLI-COLOR Plastic Primer; on other surfaces use DUPLI-COLOR Primer or Universal Primer.
  • Fill and sand uneven surfaces. Before that, generously mask off the repair spot. Larger surfaces should be masked off at creases and edges of the car body, too. 

Lacquering:

  • The surface has to be clean, dry and free from fat.
  • Before use, shake the can vigorously for 3 minutes.
  • Test spray to check colour-matching and compatibility.
  • Spray from a distance of approx. 25 cm several thin coats in 3 -5 minute intervals.
  • Earliest after 3 hours drying time it is possible to apply any DUPLI-COLOR top coat. Depending on thicknes of the applied coat, the intensity of the achieved structure can degrease.
  • Do not spray over synthetic paints!
 

TIPS FOR SPRAY PAINTING

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Signal word Danger · Hazard-determining components of labelling: acetone n-butyl acetate 2-methoxy-1-methylethyl acetate · Hazard statements H222-H229 Extremely flammable aerosol. Pressurised container: May burst if heated. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. · Precautionary statements P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P260 Do not breathe spray. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. P501 Dispose of contents / container in accordance with regional regulations. · Additional information: EUH066 Repeated exposure may cause skin dryness or cracking. Buildup of explosive mixtures possible without sufficient ventilation.

Product code 695995
EAN 4048500695995
Brand Motip

0 reviews and 0 user reviews

  • 5 0x
  • 4 0x
  • 3 0x
  • 2 0x
  • 1 0x
Nobody has yet rated.
Be the first to write a review for this product.
Do you have a question about the product? Ask a question to our pros.

Nobody has asked anything yet.
Spinner
Cookies Cookies

We need your consent to the use of individual data so that you can show information about your interests, among other things. Click "OK" to give your consent.

You can refuse consent here.

Here you can customize your cookie settings according to your preferences.