QUALITY AND PROPERTIES

• Highly dissolving properties
• Very effective
• Pleasant scent
• Waterbased

PHYSICAL AND CHEMICAL DATA

• Basis: tenside solution
• Colour: transparent foam
• Smell: characteristic
• Appearance: foam
• Coverage: approx. 4 m²
• Relative density at 20°C: 0.96 g/ml
• Vapour pressure at 20°C: 3 - 4 bar
• pH-value: 9,5 -10,5
• Storage stability:
  10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Size:
  aerosol can, maximum nominal volume 400 ml

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

USING INSTRUCTIONS

Before use, carefully read and observe the warning texts on the label!

Application:

• Bring can to room temperature.
• Operating temperature 5° to 30° C.
• Shake for 2 minutes before use.
• Apply SPRAYPLAST Cleaner and allow to have effect.
• Remove dirt with a dry, clean cloth.