MoTip Tuning Line Engine Paint red 4091 400ml
Product description
High quality lacquer to treat engine blocks.
Product characteristics
Physical and Chemical Characteristics
Contents : 400 ml
Base : Alkyd resin
Colour : Red
VOC-content : Approximately 79% w/w
Solid content : Approximately 21% w/w
Gloss : High gloss 90 at an angle of 60°
Coverage : 1,25 to 1,75 m²
Dust dry : After 30 to 60 minutes
Tack free : After 3 hours
Hardened/re-sprayable : After 24 hours
Heat resistant : To 110°C
Peak : To 150°C
Usage
Before use, carefully read the directions on the packaging and act accordingly.
Pre Treatment
De surface should be clean, dry and free of grease.
Treatment
The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.
Apply the lacquer in several thin layers. (Before applying the next layer, again shake the aerosol).
After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.
High quality lacquer to treat engine blocks.
Product characteristics
- Good filling property
- Lasting gloss
- Scratch free and shock proof
- Resistant to petrol, chemicals and weather influences
- Corrosion preventive
- Reduces the adhesion of dirt
- Non-fading (UV-resistant)
- Good adhesion
- Elastic, resistant to temperature fluctuations
Physical and Chemical Characteristics
Contents : 400 ml
Base : Alkyd resin
Colour : Red
VOC-content : Approximately 79% w/w
Solid content : Approximately 21% w/w
Gloss : High gloss 90 at an angle of 60°
Coverage : 1,25 to 1,75 m²
Dust dry : After 30 to 60 minutes
Tack free : After 3 hours
Hardened/re-sprayable : After 24 hours
Heat resistant : To 110°C
Peak : To 150°C
Usage
Before use, carefully read the directions on the packaging and act accordingly.
Pre Treatment
De surface should be clean, dry and free of grease.
Treatment
The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.
Apply the lacquer in several thin layers. (Before applying the next layer, again shake the aerosol).
After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.
MoTip Tuning Line Engine Paint red 4091 400ml
MoTip Tuning Line Engine Paint red 4091 400ml
MoTip Tuning Line Engine Paint red 4091 400ml
MoTip Tuning Line Engine Paint red 4091 400ml
(1 EUR) 23.5 Kč