ČeštinaEnglishPolskiDeutschSlovenčinaFrançaisEspañol
0.00 €
0
 
 
 

Presto Clear Coat Varnish 500 ml Spray

  • Manufacturer: Presto 
     
  • Product code:428979
     
  • Availability:in stock 6 pcs
     
  • Our price without VAT:5.43 € / pcs
     
  • Our price with VAT 21%:6.57 €
     
  •  pcs 
     
    Presto Clear Coat Varnish 500 ml Spray
    Presto Clear Coat Varnish 500 ml Spray
    Presto Clear Coat Varnish 500 ml Spray
     
     
    Glossy finish for all spray paints on acrylic or nitrocombi basis, such as Metallic-, Neon- and other paint sprays.

    Adds gloss and protecton to all rallye paintings.
     

    QUALITY AND PROPERTIES

    • High-grade acrylic quality
    • Excellent adhesion
    • Good flow, smooth surface
    • Excellent gloss stability
    • Hard surface, good elasticity
    • Quick-drying
    • Light-proof, UV-proof (non-yellowing)
    • Resistant to weathering, dirt-repellent
    • Scratch-, shock- and impact-resistant
    • After curing resistant to water, dilluted acids and bases
    • Limited fuel-resistant
     

    PHYSICAL AND CHEMICAL DATA

    • Basis of the binder: Acrylic copolymers
    • Colour: colourless
    • Smell: solvent
    • Degree of gloss (at measurement angle 60° acc. to DIN 67530):
      glossy: 80-90 gloss units
    • Efficiency:
      Depending on consistence and color of the ground:
      400 ml are sufficient for approx. 1.0 - 1.5 m²
      600 ml are sufficient for approx. 1.5 -2.3 m²
    • Drying time (at 20°C, 50% relative air humidity):
      Dust-dry: after approx. 10 minutes
      Dry to touch: after approx. 50 minutes
      Cured/can be polished after approx. 24 hours
      The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
    • Temperature-resistant: up to 80°C
    • Storage stability:
      Aerosols: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
    • Size: aerosol cans with maximum nominal volume 500 ml
     

    ENVIRONMENT AND LABELLING

    Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

    Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

    Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

     

    USING INSTRUCTIONS

    The most presto spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
    Before use, carefully read and observe the warning texts on the labels!


    Application
     

    • The previous paint coat has to dry for at least 30 minutes (obsverve the instructons on the Metalleffect Spray can.
    • Before use, shake the clear lacquer can for 3 minutes.
    • Spray from a distance of 25 cm several thin coats.
    • Remove spray dust after 24 hours drying time with presto Polishing Paste
    • Do not spray over surfaces which are painted with synthetic resin lacquer!
     

    TIPS FOR SPRAY PAINTING

    Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist.

    The aerosol can should have room temperature.

    Temperature should range between +10°C and +25°C, max. air humidity 60 %.

    Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

     
    Presto Clear Coat Varnish 500 ml Spray 
    Presto Clear Coat Varnish 500 ml Spray 
     
     
    Do you have any questions on this item? Do not hesitate and ask us.
    *
     
     
    *

    (please enter the result in order to protect against abuse)
     
     
    ČeštinaEnglishPolskiDeutschSlovenčinaFrançaisEspañol
    0
    Currency

    Indicative exchange rate:
    EUR  (1 EUR) 26.5 Kč

     
    © ColorShop.cz
    « Previous
    Next »